POTASSIUM SORBATE AS A WINE PRESERVATIVE
By Katie Cook, Enology Project Leader of University of Minnesota, Horticulture Research Center
Potassium Sorbate (K-sorbate) is a relatively recent wine additive (it only first started to be used about 50 years ago), used primarily as a preservative to help prevent re-fermentation of sweet or semi-sweet wines. It is widely used in many types of foods ranging from cheese and yogurt to dried fruit and meat. It is even used in cosmetics to help give them a stable shelf life. It is generally considered as safe, having about the same toxicity as table salt.
To be honest, I hadnít heard much of wineries using K-sorbate before returning to Minnesota, and had never used it in off-dry or sweet wines in either Alsace or Australia, and now I get questions about it on a regular basis. So, Iíve been doing a bit of research on it lately and figured Iíd share with you what I have learned.
When added to water, K-sorbate breaks down into sorbic acid (sorbate) and ionic potassium (K). It is the sorbic acid that is active as an anti-microbial. It doesnít kill yeast cells, but only prevents them from growing and being active. It has no effect on lactic acid and acetic acid bacteria at the amounts added in wine. Therefore, it should only be added to wine that is already stable via its pH and free sulfur. Another important point to remember is that just as sulfur dioxide (SO2) is more active at lower pH, so is sorbate.
Here are some more important points to know:
- Like SO2, sorbic acid is detectable in wines when it is added above certain levels, though the reported values vary from 135 to 400 mg/L. *
- Over time, sorbic acid will be reduced to form ethyl sorbate, which has been described as having pineapple and celery aromas. You cannot prevent this from happening in wine, as this reduction occurs naturally with the presence of ethanol. While these aromas arenít inherently objectionable, they will mask other fruity aromas in your wine. Some people may consider it a flaw. The concentration of ethyl sorbate will continue to rise over time, and is dependent on your initial sorbic acid concentration. Therefore, sorbate is generally added to wines which arenít destined to be aged.
- It will not inhibit bacterial activity. If you add it to wine before bulk storage or bottling, you need to be absolutely certain that the wine is stable. If there is any lactic acid bacteria present in your wine, it will still be there after sorbate is added. Potassium Sorbate must ALWAYS be used in conjunction with proper SO2 addition.
- If lactic acid bacteria is present in the wine, it will metabolize sorbic acid and produce a chemical that has a strong odor of Geranium leaves and is considered a major wine flaw.
- The amount of sugar in the wine has no effect on the amount of sorbate needed. The only concerns are pH, alcohol, and the initial population of yeast cells (which should be less than 100/mL Ė make sure the wine is very clear before adding K-sorbate).
- When adding K-Sorbate to wine, remember that it contains about 75% sorbic acid by weight (100 mg of K-sorbate contains 75 mg of sorbic acid).
- The BATF limits sorbic acid addition to wines to 300 mg/L (the European Union regulations limit its addition to 200 mg/L).
- Sorbate SHOULD NOT be added to dry red or white wines. There is no risk of refermentation when there is no sugar present. You are only adding the risk of off-odors from ethyl sorbate as well as risking the production of geranium taint.
- Sorbic Acid is not very soluble in water. Precautions need to be made when adding it to wine to ensure that it is properly dissolved in the wine.
- Sorbate is not allowed as an additive in production of organic wine
- Certain countries do not allow the import of wine containing Sorbate
As for the recommended rates of sorbic acid that should be used in wine, there seems to be no clear consensus ...
>> CLICK HERE TO READ THE FULL ARTICLE
SHARE THIS ARTICLE ...